Toledo-Lucas County Health Department

Comments
Discussed Covid-19 and expired testing strips. PIC stated the timers for the fries are broken and they are cooked to order, with the excess discarded. New timers have been ordered and once they arrive, the facility will resume using TILT.
Comments related to the Critical Control Point Inspection (Item 35) are listed below. Note: Positive observations are indicated by the element number and the letter P. IV - P - Demonstration of Knowledge: The person in charge is Certified in Food Protection. II - P - Good Hygienic Practices: Food employee was demonstrating good hygiene practices. VII - P - Protection from Contamination: Observed raw animal foods separated by type during storage, preparation, holding, and display. VII - P - Protection from Contamination: Foods are protected from physical and environmental contamination during storage, preparation, holding and display. III - P - Preventing Contamination by Hands: Observed food employee changing gloves when required. III - P - Preventing Contamination by Hands: Observed food employee washing hands when required. VI - P - TCS Food: Observed ready to eat TCS foods being properly date marked, and discarded when required. VI - P - TCS Food: Observed hot foods being held at 135°F or above; cold foods being held at 41°F or below. III - P - Preventing Contamination by Hands: Observed food employee washing hands prior to donning single use gloves. VIII - P - Consumer Advisory: Observed a consumer advisory on the menu for animal foods that are served raw, undercooked or not otherwise processed to eliminate pathogens. III - P - Preventing Contamination by Hands: Food employees were not contacting exposed ready-to-eat foods with bare hands. I - P - Employee Health: The operation had an employee health policy on file. III - P - Preventing Contamination by Hands: Hand washing facilities are properly supplied. X - P - Chemical: Toxic materials are properly identified and stored. VI - P - TCS Food: Raw animal food was being cooked to the required temperature.

Inspection Information