< Previous Inspection ۸ Up to Facility Next Inspection >
Sampling Details
Sub Type: School Special Feature: Location:
Area: 1800 Volume (gallons): 65000 Flow measure reading (gpm): 0 Minimum required flow (gpm): 168
Disinfectant: Sodium Hypochlorite Secondary Disinfectant: ORP: 800 Turnover Rate (min):
Total Chlorine (ppm): 4 Free Chlorine (ppm): 4 Combined Chlorine (ppm): 0 Total Bromine (ppm):
Alkalinity (ppm): 30 Pool water temp ˚F: 88 pH: 7.8 Cyanuric acid (ppm): 0
Spa water temp ˚F: Spa water replaced every 30 days: Max Allow. Filter Flow (gpm): 282 Max Allow. Flow: Jet pump capacity (gpm):
Max Allow. Flow: SF pump capacity (gpm):
[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
A means of determining rate-of-flow was not functioning for all water pumps.
Properly install a flow meter or have a pump curve available for every water pump used for the pool.
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm.
Raise the total alkalinity to at least 60 ppm.


Inspection Information


[?] Facility Type: Pool

[?] Inspection Type: Standard

[?] Inspection Date: 10-July-2019

Comments
Pool water was clear.
Disinfectant residuals meet minimum code requirements at this time.
Alkalinity was observed low (<60ppm) during inspection.
Flow meter was not functioning during inspection, operator explained that they recently replaced it.
Safety equipment and signs provided.
Pool looks good. Keep up the good work!