| Sampling Details | |||
|---|---|---|---|
| Sub Type: Other | Special Feature: | Location: | |
| Area: 1160 | Volume (gallons): 35500 | Flow measure reading (gpm): | Minimum required flow (gpm): 74 |
| Disinfectant: Sodium Hypochlorite | Secondary Disinfectant: | ORP: 715 | Turnover Rate (min): |
| Total Chlorine (ppm): 1.5 | Free Chlorine (ppm): 1.5 | Combined Chlorine (ppm): 0 | Total Bromine (ppm): |
| Alkalinity (ppm): 110 | Pool water temp ˚F: 78 | pH: 7.6 | Cyanuric acid (ppm): |
| Spa water temp ˚F: | Spa water replaced every 30 days: | Max Allow. Filter Flow (gpm): | Max Allow. Flow: Jet pump capacity (gpm): |
| Max Allow. Flow: SF pump capacity (gpm): |
3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
A means of determining rate-of-flow was not found for all water pumps.
Properly install a flow meter or have a pump curve available for every water pump used for the pool.
| Comments |
|---|
| Inspection Notes: 1. Pool water observed clear 2. Safety equipment available 3. Ensure a new flow filter is installed so that it is easily readable. |