[?] A summary of the violations found during the inspection are listed below.
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm.
Raise the total alkalinity to at least 60 ppm.
| Sampling Details | |||
|---|---|---|---|
| Sub Type: School | Special Feature: | Location: | |
| Area: 1800 | Volume (gallons): 65000 | Flow measure reading (gpm): 0 | Minimum required flow (gpm): 135 |
| Disinfectant: Sodium Hypochlorite | Secondary Disinfectant: | ORP: 780 | Turnover Rate (min): |
| Total Chlorine (ppm): 4 | Free Chlorine (ppm): 5 | Combined Chlorine (ppm): 1 | Total Bromine (ppm): |
| Alkalinity (ppm): 40 | Pool water temp ˚F: 84 | pH: 7.6 | Cyanuric acid (ppm): |
| Spa water temp ˚F: | Spa water replaced every 30 days: | Max Allow. Filter Flow (gpm): | Max Allow. Flow: Jet pump capacity (gpm): |
| Max Allow. Flow: SF pump capacity (gpm): |
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm.
Raise the total alkalinity to at least 60 ppm.
| Comments |
|---|
| Pool notes: -Pool was clear. -Disinfectant residuals meet minimum code requirements at this time. -Alkalinity was observed low (<60ppm) during inspection. -Safety equipment and signs provided. -Ensure temperature of pool is not higher than 90F. |