| Sampling Details | |||
|---|---|---|---|
| Sub Type: School | Special Feature: | Location: | |
| Area: 1800 | Volume (gallons): 65000 | Flow measure reading (gpm): | Minimum required flow (gpm): |
| Disinfectant: Di/Tri-Chloro | Secondary Disinfectant: | ORP: 710 | Turnover Rate (min): 480 |
| Total Chlorine (ppm): | Free Chlorine (ppm): 10 | Combined Chlorine (ppm): | Total Bromine (ppm): |
| Alkalinity (ppm): 60 | Pool water temp ˚F: | pH: 7.2 | Cyanuric acid (ppm): 60 |
| Spa water temp ˚F: | Spa water replaced every 30 days: | Max Allow. Filter Flow (gpm): | Max Allow. Flow: Jet pump capacity (gpm): |
| Max Allow. Flow: SF pump capacity (gpm): |
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Repeat The filter system flow meter is not working.
Repair the flow meter so water turnover rates can be determined.
| The following violation(s) have been corrected since the last inspection. |
|---|
| 3701-31-04 (B)(1)(e)/Automatic Chemical Controller (ACC) is functioning properly The ACC unit pH was noted at 7.9. Measured pH was 7.4. Calibrate the ACC unit so the pool pH can be monitored accurately. Correct By: 28-Oct-2014 |
| Comments |
|---|
| All other violations corrected. Thanks! Pool Notes: 1. The reinspection scheduled for 10/28/14 was rescheduled. 2. ACC unit pH noted at 7.4. 3. ACC unit alarm was functioning properly. Reinspection conducted by Scott Bradley,R.S. 732-7614 |