Sampling Details
Sub Type: School Special Feature: Location:
Area: 1800 Volume (gallons): 65000 Flow measure reading (gpm): 200 Minimum required flow (gpm): 168
Disinfectant: Sodium Hypochlorite Secondary Disinfectant: ORP: 690 Turnover Rate (min): 480
Total Chlorine (ppm): 5 Free Chlorine (ppm): 5 Combined Chlorine (ppm): 0 Total Bromine (ppm):
Alkalinity (ppm): 30 Pool water temp ˚F: 90 pH: 7.5 Cyanuric acid (ppm):
Spa water temp ˚F: Spa water replaced every 30 days: Max Allow. Filter Flow (gpm): Max Allow. Flow: Jet pump capacity (gpm):
Max Allow. Flow: SF pump capacity (gpm):
[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity measured at 30 ppm was less than the minimum reading of 60 ppm specified by code.
Raise the total alkalinity to at least 60 ppm. NOTE: The National Swimming Pool Foundation (NSPF) recommends maintaining Total Alkalinity at 80-120 ppm with a target reading of 100 ppm.


Inspection Information


[?] Facility Type: Pool

[?] Inspection Type: Standard

[?] Inspection Date: 11-December-2017

Comments
Pool inspection notes:
Disinfectant residual and water quality readings meet minimum code requirements at this time.
Water clarity is excellent.
Pool has two (2) large unblockable custom fabricated drains in the deep end of the pool.
Recommend replacing pool reagents annually (mark received by date on reagents or kit to keep track).
ACC tested during inspection. Visual no flow alarm activated; chemical feed pumps deactivated as required.
Pool looks great!