Sampling Details | |||
---|---|---|---|
Sub Type: Hotel/motel | Special Feature: | Location: | |
Area: 418 | Volume (gallons): 12500 | Flow measure reading (gpm): 45 | Minimum required flow (gpm): |
Disinfectant: Salt | Secondary Disinfectant: | ORP: 735 | Turnover Rate (min): 277 |
Total Chlorine (ppm): 12 | Free Chlorine (ppm): 12 | Combined Chlorine (ppm): 0 | Total Bromine (ppm): |
Alkalinity (ppm): 40 | Pool water temp ˚F: 79 | pH: 7.4 | Cyanuric acid (ppm): |
Spa water temp ˚F: | Spa water replaced every 30 days: | Max Allow. Filter Flow (gpm): | Max Allow. Flow: Jet pump capacity (gpm): |
Max Allow. Flow: SF pump capacity (gpm): |
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Total alkalinity was less than 60 ppm. Observed to be 40ppm.
Raise the total alkalinity to at least 60 ppm.
Comments |
---|
Chlorine levels are quite high, recommend chlorine levels to be between 2-4ppm. Alkalinity is low, needs to be above 60. Otherwise the pool is in good condition and all other requirements were met. |