Sampling Details
Sub Type: Other Special Feature: Location:
Area: 3200 Volume (gallons): 137500 Flow measure reading (gpm): 300 Minimum required flow (gpm): 287
Disinfectant: Sodium Hypochlorite Secondary Disinfectant: ORP: Turnover Rate (min): 480
Total Chlorine (ppm): 3 Free Chlorine (ppm): 3 Combined Chlorine (ppm): 0 Total Bromine (ppm):
Alkalinity (ppm): 60 Pool water temp ˚F: 82 pH: 7.8 Cyanuric acid (ppm): 40
Spa water temp ˚F: Spa water replaced every 30 days: Max Allow. Filter Flow (gpm): Max Allow. Flow: Jet pump capacity (gpm):
Max Allow. Flow: SF pump capacity (gpm):
[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(4)(a)(vi) / Total alkalinity is tested weekly
Repeat Total alkalinity was not consistently tested weekly.
Test total alkalinity at least once/week.
3701-31-04 (B)(4)(a)(vii) / Cyanuric acid is tested weekly
Repeat Cyanuric acid was not tested weekly.
Test for cyanuric acid level at least once/week.
3701-31-04 (B)(6)(o) / Ladders/stairs/steps are in good repair/slip resistent
Step hand rail was not secure to the pool deck.
Repair the step hand rail so that it is good repair.
3701-31-04 (B)(6)(q) / Depth markers/deck warning signs are maintained
Repeat Depth markerss were not observed on the pool deck.
Add the depth markers so that bathers are able to clearly see the depth of the water.


Inspection Information


[?] Facility Type: Pool

[?] Inspection Type: Standard

[?] Inspection Date: 15-August-2018

Comments
Pool was observed closed at time of inspection due to switching to school hours
Cyanuric acid is detected in the pool. ensure that cyanuric acid is being tested weekly

1. Water clarity and disinfectant residuals meet minimum code requirements.
2. Safety equipment provided as required.
3. Pool perimeter was secure
4. Filters psi were 0/18/25/27
5. Turnover rate is 459 min.

If you have any questions call, Mackinzie Dickman at 513-732-7602