[?] A summary of the violations found during the inspection are listed below.
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Repeat Two skimmer weirs were missing.
Replaced the missing skimmer weirs.
| Sampling Details | |||
|---|---|---|---|
| Sub Type: Other | Special Feature: | Location: | |
| Area: 1650 | Volume (gallons): 51000 | Flow measure reading (gpm): 110 | Minimum required flow (gpm): 110 |
| Disinfectant: Sodium Hypochlorite | Secondary Disinfectant: | ORP: 770 | Turnover Rate (min): 480 |
| Total Chlorine (ppm): 7 | Free Chlorine (ppm): 7 | Combined Chlorine (ppm): 0 | Total Bromine (ppm): |
| Alkalinity (ppm): 90 | Pool water temp ˚F: 78 | pH: 7.3 | Cyanuric acid (ppm): 0 |
| Spa water temp ˚F: | Spa water replaced every 30 days: | Max Allow. Filter Flow (gpm): 141 | Max Allow. Flow: Jet pump capacity (gpm): |
| Max Allow. Flow: SF pump capacity (gpm): |
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Repeat Two skimmer weirs were missing.
Replaced the missing skimmer weirs.
| Comments |
|---|
| -The disinfectant residuals and water quality parameters meet code requirement. -Free chlorine was 8 ppm, ideal range is 2-4 ppm. -All required safety equipment was provided. -The pool perimeter was secure. -The filter pressure was 17 psi. -The pool water is clear. -The ACC unit measured pH at 7.5. -Turn over rate was 480 minutes. If you have any questions or concerns, call me at (513) 732-7612. |