[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (D)(05) / Cyanuric acid level shall not exceed 70 ppm.
Cyanuric acid was measured at 80 ppm.
The maximum allowable level for cyanuric acid is 70 ppm. Drain the pool at least halfway and fill with clean water. Monitor the amount of cyanuric acid being used and adjust accordingly.


Inspection Information


Facility Type: Pool

Inspection Type: Standard

Inspection Date: 26-July-2017

Comments
-The filter pressure was measured at 18 psi.
-Turnover rate was 322 minutes.