[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Repeat Equipment was not maintained per manufacturers specifications. Weirs are missing in the skimmers.
All equipment must be maintained in accordance with the manufacturers specifications. PLACE WEIRS IN THE SKIMMERS.
3701-31-04 (B)(6)(p) / Deck surfaces are free of standing water or other hazards.
Deck surfaces had standing water or other hazards. A pool cover tie down anchor is sticking up.
LOWER THE POOL TIE DOWN ANCHOR SO THAT IT IS LEVEL WITH THE DECK TO PREVENT INJURY AND TRIPPING. Correct By: 28-Aug-2023
3701-31-04 (C)(6) / Pool water temperature does not exceed 90 degrees Fahrenheit without approval from the Director
Pool water temperature was above 90 degrees Fahrenheit without approval from the Director of Health.
Either reduce the water temperature of the pool to below 90 degrees Fahrenheit. REDUCE POOL WATER TEMPERATURE. Correct By: 28-Aug-2023


Inspection Information


Facility Type: Pool

[?] Inspection Type: Standard

Inspection Date: 21-August-2023


Comments
THE RING BUOY IS IN POOR CONDITION.