[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications. The flow rate exceeds the max allowable by the filter
All equipment must be maintained in accordance with the manufacturers specifications. MAINTAIN THE FLOW RATE BETWEEN 13 AND 38 GPM Correct By: 25-Jul-2019
3701-31-04 (D)(05) / Cyanuric acid level shall not exceed 70 ppm.
Cyanuric acid level exceeded 70 ppm
Drain the pool at least halfway and fill with clean water. Monitor the amount of cyanuric acid being used and adjust accordingly. DECREASE CYANURIC ACID Correct By: 25-Jul-2019

Inspection Information

Facility Type: Special Use

[?] Inspection Type: Standard

Inspection Date: 18-July-2019

Corrections made since the 6-12-19 inspection
-the water fill spout has an air gap