3701-31-04 (B)(6)(t) / Equipment/chemical/storage areas are free of hazards/accessible only to authorized personnel.
Critical Repeat Equipment/chemical/storage areas were not secured.
These storage areas must be kept inaccessible to everyone but authorized personnel. Secure the areas.
KEEP EQUIPMENT ROOM LOCKED. Correct By: 07-Jun-2022
3701-31-04 (B)(4)(a)(vi) / Total alkalinity is tested weekly
Total alkalinity was not tested weekly.
Test total alkalinity at least once/week.
TEST AND RECORD ALKALINITY WEEKLY. Correct By: 08-Jun-2022
3701-31-04 (B)(6)(c)(ii) / Backwash lines and lines from drainage sumps shall have an air gap and remain open to freely drain.
Repeat Backwash lines and lines from drainage sumps did not have an air gap prior to discharge
Open the lines that discharge into the backwash or drainage sumps so that there is an air gap and the lines can drain freely.
PROVIDE AIR GAP ON THE FILTERS BACKWASH LINE. Correct By: 06-Jun-2022
3701-31-04 (B)(6)(c)(iii) / Floor areas in equipment, filter and storage rooms shall be free of standing water
There was standing water on the floor areas of the equipment room.
Remove the standing water and modify the floor so that water will flow to the drain and not be able to pool on the floor.
REPAIR LEAK CAUSING STANDING WATER IN THE EQUIPMENT ROOM. Correct By: 08-Jun-2022
Facility Type: Pool
[?] Inspection Type: Standard
Inspection Date: 06-June-2022
| Comments |
|---|
| HAVE BACKFLOW PREVENTER INSPECTED ANNUALLY AND MAINTAIN DOCUMENTATION AT THE POOL. Keep the chemicals’ Safety Data Sheets (SDS) in the equipment room and have Personal Protective Equipment (PPE) such as chemical gloves and goggles available for handling chemicals. The Certificate of Compliance is not available for the main drain cover. Our records show that the main drain suction outlet covers (Waterway 640-472xV) were installed 6-27-21. The covers have a 7 year life span and must be replaced before 7/1/2028. The operator (lifeguard) was observed performing onsite chemical tests appropriately and is aware of the acceptable parameters and necessary corrective actions. |