3701-31-04 (C)(2) / pH is within 7.2 to 7.8
pH was outside the range of 7.2 to 7.8. (6.8) This is a repeat problem. The auto controller indicated 7.3 as pH.
Treat the pool water so that the pH is within the acceptable range. Check to make sure the auto controller is working properly Correct By: 25-Oct-2013
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Total alkalinity was less than 60 ppm It tested so low as to be off my scale..
Raise the total alkalinity to at least 60 ppm. Recheck as often as necessary to make sure this stays ok. This is a continuing problem with this spa.
Facility Type: Spa
[?] Inspection Type: Standard
Inspection Date: 25-October-2013
Comments |
---|
Spa approved without chemical controller that indicates ORP. When controller is changed it will be required that one that indicates ORP is installed. Until that time it will be necessary to check spa disinfection levels on the schedule for pools with controllers that do not indicate ORP. |