< Previous Inspection ۸ Up to Facility Next Inspection >
[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications. The water level is more than 1 inch over the gutters.
All equipment must be maintained in accordance with the manufacturers specifications. FOR PROPER SKIMMING OF THE POOL ADJUST THE WATER LEVEL TO 1/4 TO 1/2 INCH ABOVE THE SKIMMER. Correct By: 17-Jul-2017


Inspection Information


Facility Type: Pool

[?] Inspection Type: Standard

Inspection Date: 14-July-2017

Comments
IT LOOKS LIKE YOU STILL NEED AT LEAST ONE NO DIVING MARKING AT THE SHALLOW END OF THE POOL. ALSO THE 11 AT THE DEEP END NEED FT MARKING.

BECAUSE THE DRAIN COVERS ARE RATED FOR 515 GPM, DO NOT EXCEEDED 515 GPM FLOW. THIS SHOULD BE MARKED AS THE MAX FLOW AND NOT THE FILTER MAX FLOW SINCE THE FILTER MAX FLOW IS A HIGHER NUMBER.

THE AIR GAP ON THE BACKWASH LINE WILL NEED TO BE DISCUSSED FURTHER.