[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Repeat Equipment was not maintained per manufacturers specifications. Two weirs in skimmers are sticking - no floating freely with the water level.
All equipment must be maintained in accordance with the manufacturers specifications. ADJUST WEIRS IN SKIMMER BOX SO THAT THEY FLOAT FREELY WITH THE WATER LEVEL.
3701-31-04 (B)(6)(h) / Required meters and gauges maintained/functional
Repeat Required meters and gauges were not maintained or were not functional while the pool is in operation. Fountain flow meter not functioning.
Maintain all meters and gauges in a properly functioning manner at all times while the pool is in operation. REPAIR FOUNTAIN FLOW METER.
3701-31-04 (D)(05) / Cyanuric acid level shall not exceed 70 ppm.
Cyanuric acid level exceeded 70 ppm
Drain the pool at least halfway and fill with clean water. Monitor the amount of cyanuric acid being used and adjust accordingly. REDUCE CYANURIC ACID TO 70 PPM OR LESS. Correct By: 18-Jul-2022


Inspection Information


Facility Type: Special Use

[?] Inspection Type: Standard

Inspection Date: 11-July-2022

Comments
ACC appears to be disconnected and the feeder pumps are running on a timers.