3701-31-04 (B)(1)(a) / Outlet covers shall be installed/secured/in compliance
Critical Repeat Outlet covers were not secured. Screws missing in drain covers.
Do not operate the pool when the outlet covers are not secured. Secure the covers prior to the pool being placed back into operation. INSTALL FOUR SCREWS IN THE MAIN DRAIN COVERS. USE STAINLESS STEEL SCREWS SUPPLIED BY THE MANUFACTURER.
3701-31-04 (B)(4)(a)(vii) / Cyanuric acid is tested weekly
Cyanuric acid was not tested weekly.
Test for cyanuric acid level at least once/week. TEST AND RECORD CYANURIC ACID WEEKLY.
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Repeat Equipment was not maintained per manufacturers specifications. Acid feeder not connected.
All equipment must be maintained in accordance with the manufacturers specifications. REPAIR ACID FEEDER.
3701-31-04 (B)(6)(s) / Perimeter barrier is in good repair to prevent unauthorized entry
Repeat Gates or doors were not self-closing and self-latching.
Repair gates or doors in order to be self-closing and self-latching. REPAIR GATE SO IT SELF-LATCHES.
3701-31-04 (C)(2) / pH is within 7.2 to 7.8
Repeat pH was outside the range of 7.2 to 7.8.
Treat the pool water so that the pH is within the acceptable range. ADJUST pH.