[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6)(g) / Throttle valve properly installed/maintained/adjusted
Throttle valve was not properly maintained/adjusted. The max and min flow were not labeled by the flow meter or by the throttle valve.
Throttle valves must be maintained in the same position was when originally installed and approved. Restore the setting of the throttle valve and lock it into place. PLACE THE MAX AND MIN FLOW BY THE THROTTLE VALVE OR BY THE FLOW METER.
3701-31-04 (D)(05) / Cyanuric acid level shall not exceed 70 ppm.
Cyanuric acid level exceeded 70 ppm
Drain the pool at least halfway and fill with clean water. Monitor the amount of cyanuric acid being used and adjust accordingly.


Inspection Information


Facility Type: Special Use

[?] Inspection Type: Standard

Inspection Date: 28-August-2018

Comments
DO NOT EXCEED 18 GPM PER WADING POOL FILTER INSTRUCTIONS.