[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications. The Skimmer is missing the weir.
All equipment must be maintained in accordance with the manufacturers specifications. REPLACE THE MISSING WEIR IN THE SKIMMER. Correct By: 28-Mar-2019
3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
A means of determining rate-of-flow was not found for all water pumps. The jet pump does not have a flow meter or pressure/vacuum gauges.
Properly install a flow meter or have a pump curve available for every water pump used for the pool. INSTALL A MEANS OF DETERMINING THE FLOW RATE OF THE JET PUMPS Correct By: 28-Mar-2019
3701-31-04(D)(6)(a)(1) / Combined chlorine shall not exceed 1.0 ppm.
Combined chlorine was greater than 1.0 ppm.
Treat the pool so that the combined chlorine is less than 1 ppm. DRAIN SPA AND REFILL OR SUPER CHLORINATE TO REDUCE COMBINE CHLORINE LEVEL TO 1.0 OR LESS. Correct By: 02-Mar-2019


Inspection Information


Facility Type: Spa

[?] Inspection Type: Standard

Inspection Date: 28-February-2019

Comments
Ensure that the ACC flow switch function is recorded monthly.