[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications. Flow rate exceeds maximum allowable flow rate of the filter.
All equipment must be maintained in accordance with the manufacturers specifications. REDUCE THE FLOW RATE TO 63 GPM OR LESS. Correct By: 04-Aug-2023
3701-31-04 (B)(6)(y) / Chemicals are properly stored/used
Critical Repeat Chemical containers were stored without labels identifying the contents. The acid tank was not labeled.
Label and properly store all chemical containers to avoid a chemical reaction or unnecessary exposure. LABEL THE ACID TANK.
3701-31-04 (B)(6)(y) / Chemicals are properly stored/used
Critical Repeat Chemical containers were stored without labels identifying the contents. Different chemicals are stacked on top other each other.
Label and properly store all chemical containers to avoid a chemical reaction or unnecessary exposure. DO NOT STACK DIFFERENT CHEMICALS ON TOP OF EACH OTHER. Correct By: 29-Jul-2023
3701-31-04 (B)(6)(y) / Chemicals are properly stored/used
Critical Chemical containers were stored without labels identifying the contents. The acid tank was net to the heater.
Label and properly store all chemical containers to avoid a chemical reaction or unnecessary exposure. MOVE THE ACID TANK AWAY FROM THE HEATER. Correct By: 29-Jul-2023
3701-31-04 (E)(2)(e) / Working emergency telephone/call box provided.
Emergency device (telephone) was not working. No one answered the emergency phone at the front deck when called from the pool area.
Ensure that the emergency device is functioning properly and rings to the emergency response authorities. ANSWER THE PHONE CALL FROM THE POOL AREA WITH IN 3-4 RINGS. Correct By: 29-Jul-2023


Inspection Information


Facility Type: Pool

[?] Inspection Type: Standard

Inspection Date: 28-July-2023

Comments
DO NOT USE THE OTO TEST KIT. REMOVE THE OTO TEST KIT FROM THE EQUIPMENT ROOM.

WHEN THE POOL IS CLOSED RECORD "POOL CLOSED" IN THE RECORD LOG.

TEST AND RECORD THE FLOW SWITCH ON THE ACC.