3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
A means of determining rate-of-flow was not found for all water pumps. The jet pump did not have a flow meter (or pressure and vacuum gauges with pump curve and calculation)
Properly install a flow meter or have a pump curve available for every water pump used for the pool. INSTALL FLOW METER (OR PRESSURE AND VACUUM GAUGES WITH PUMP CURVE) Correct By: 29-May-2019
3701-31-04 (C)(2) / pH is within 7.2 to 7.8
pH was outside the range of 7.2 to 7.8.
Treat the pool water so that the pH is within the acceptable range. ADJUST pH. Correct By: 02-May-2019
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm.
Raise the total alkalinity to at least 60 ppm. ADJUST ALKALINITY Correct By: 02-May-2019