3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
Repeat A means of determining rate-of-flow was not found for all water pumps.
Properly install a flow meter or have a pump curve available for every water pump including jet pump used for the pool INSTALL A FLOW METER OR INSTALL A PRESSURE GAUGE AND A VACUUM GAUGE ON THE JET PUMP..
3701-31-04 (C)(2) / pH is within 7.2 to 7.8
Repeat pH was outside the range of 7.2 to 7.8.
Treat the SPA water so that the pH is within the acceptable range THIS MAY REQUIRE MORE FREQUENT TESTING TO MEET DEMAND BASED ON BATHER LOAD..
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm MAY REQUIRE MORE FREQUENT MONITORING OF CHEMICALS TO ADJUST FOR BATHER LOAD.
Raise the total alkalinity to at least 60 ppm.