[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(1)(a) / Outlet covers shall be installed/secured/in compliance
Critical Screws are missing i all 4 drain covers.
REPLACE THE MISSING SCREWS IN THE MAIN DRAIN COVERS. Correct By: 30-Jul-2020
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications. The skimmer weir sticks.
All equipment must be maintained in accordance with the manufacturers specifications. REPAIR THE SKIMMER WEIR SO THAT IT FREELY MOVES AND FLOATS WITH THE MOVEMENT OF THE WATER. Correct By: 30-Jul-2020
3701-31-04 (B)(6)(q) / Depth markers/deck warning signs are maintained
Depth markers/deck warning signs were not maintained in a clearly legible/visible manner.
Replace the depth markers/deck warning signs so that bathers are able to clearly see the depth of the water and that no diving is permitted where clearly indicated. REPAINT THE DEPTH MARKING ON THE DECK. MARKINGS MUST BE AT LEAST 4 INCHES IN SIZE, NO MORE THAN 24 INCHES FROM THE EDGE OF THE WATER, AND NO MORE THAN 25 FT APART. Correct By: 30-Jul-2020


Inspection Information


Facility Type: Pool

[?] Inspection Type: Standard

Inspection Date: 24-July-2020

Comments
When using CYA (cyanuric acid) the alkalinity level is calculated by subtracting 1/3 the CYA level from the alkalinity reading. EXAMPLE: alkalinity test reading = 70 ppm, CYA = 60 ppm. Alkalinity is 70 ppm – (60/3) = 50 ppm