3701-31-04 (B)(6)(i) / A means of determining rate-of-flow on all water pumps
A means of determining rate-of-flow was not found for all water pumps. The jet pump does not have a flow meter or other means of determining the flow rate.
Properly install a flow meter or have a pump curve available for every water pump used for the pool. INSTALL A FLOW METER OR PRESSURE AND VACUUM GAUGE ON THE JET PUMP. Correct By: 15-Dec-2019
3701-31-04 (C)(2) / pH is within 7.2 to 7.8
pH was outside the range of 7.2 to 7.8.
Treat the pool water so that the pH is within the acceptable range. INCREASE pH Correct By: 16-Nov-2019
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm.
Raise the total alkalinity to at least 60 ppm. INCREASE ALKALINITY. Correct By: 16-Nov-2019