[?] A summary of the violations found during the inspection are listed below.

3701-31-04 (B)(1)(a) / Outlet covers shall be installed/secured/in compliance
Critical The date was installation of the drain covers was not available.
IF THE MAIN DRAIN COVERS INSTALLATION DATE IS UNKNOWN OR IF THE DRAIN COVERS HAVE BEEN IN PLACE FOR MORE THAN 5 YEARS THEY MUST BE REPLACED. RETAIN THE CERTIFICATE OF COMPLIANCE AND THE INSTALLATION INSTRUCTIONS. Correct By: 15-May-2019
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications. The skimmer is missing the weir.
All equipment must be maintained in accordance with the manufacturers specifications. REPLACE THE WEIR IN THE SKIMMER. Correct By: 25-Jun-2018
3701-31-04 (B)(6) / Equipment is maintained per manufacturers specifications.
Equipment was not maintained per manufacturers specifications.
All equipment must be maintained in accordance with the manufacturers specifications. REDUCE THE FLOW RATE TO 18 GPM BUT AT LEAST 13 GPM. Correct By: 25-Jun-2018
3701-31-04 (D)(05) / Cyanuric acid level shall not exceed 70 ppm.
Repeat Cyanuric acid level exceeded 70 ppm
Drain the pool at least halfway and fill with clean water. Monitor the amount of cyanuric acid being used and adjust accordingly. Correct By: 25-Jun-2018


Inspection Information


Facility Type: Special Use

[?] Inspection Type: Standard

Inspection Date: 11-June-2018