| 3717-1-04.1(G) / Can openers - cleanability Corrected During Inspection Cutting or piercing parts of can openers not removable for cleaning/replacement. Observed can opener with non removable blade (Hand-held). Action: Manager threw away unit.  |
| 3717-1-04.4(I) / Manual warewashing equipment - wash solution temperature. Critical Repeat Corrected During Inspection Manual wash solution not being maintained at 110˚ F or above. Observed 100 degrees at 3 comp. wash station. Action Taken: Manager removed blade during inspection. |
| 3717-1-04.5(A)(3) / Cleanliness of nonfood-contact surfaces of equipment. Repeat Corrected During Inspection Non-food contact surfaces of equipment are unclean. Observed ice droplets located under freezer condensation unit in Traulsen. Action: Clean area ASAP, and remove boxes from underneath unit. Action; Manager moved boxes during inspection. |
| 3717-1-04.5(D) / Nonfood-contact surfaces - cleaning frequency. Non-food contact surface(s) not cleaned at the required frequency. Observed heavy dust on top of microwave's. Action: Clean unit's on frequent basis to prevent future build-up. |
| 3717-1-05.1(S) / Plumbing system - maintained in good repair. Plumbing system not properly maintained or repaired. Observed spigot spray apparatus on three compartment to have residue. Action" Clean unit ASAP and on frequent basis to prevent build-up. |
| 3717-1-06.4(B) / Cleaning - frequency and restrictions. Repeat Facility not maintained clean. Observed residue on back wall located in several location Action: Clean wall ASAP and on frequent basis to prevent build-up. |
| 3717-1-06.1(C) / Floor and wall junctures - coved, and enclosed or sealed. Floor and wall junctures not properly coved. Observed wall cover not properly sealed to wall, located at several locations at back of wall. Action: Repair wall to properly seal to wall, and prevent insect's from harboring. |