Inspection Information | Facility Name: | Madison Shell |
---|---|
Facility Type: | Commercial RFE < 25000 sq. ft. |
[?] Inspection type: | Standard |
Inspection date: | 17-March-2023 |
Violations: A summary of the violations found during the inspection are listed below. |
3717-1-05.1(O)(1) / Using a handwashing sink - accessible at all times Critical Handwashing sink not accessible. Observed hand sink that is not accessible, covered with boxes. Action: Hand wash sink shall be accessible and usable at all times. Will Recheck during reinspection. Correct By: 31-Mar-2023 ![]() |
3717-1-04.1(Y) / Temperature measuring devices. Hot and cold holding equipment thermometer was missing, located incorrectly, or not easily readable. Observed no thermometer located in Coldsell Reach in unit. Action: Provide a thermometer ASAP, will recheck in ten days. Correct By: 31-Mar-2023 ![]() |
3717-1-05.4(P) / Maintaining refuse areas and enclosures. Improperly cleaned storage area for refuse, recyclable, or returnables. Observed debris/trash around dumpster enclosure on ground. Action: Clean area thoroughly on frequent basis. Recheck during reinspection. ![]() |
3717-1-05.4(F)(1) / Outside receptacles - tight fitting lids Outdoor refuse containers without tight fitting lids, doors, or covers. Observed dumpster stored in the open position. Action: Keep lids properly enclosed between use. ![]() |
3717-1-06.4(F) / Drying mops. Repeat Mops dried improperly. Observed wet mop head stored in bucket. Action: Mop shall be stored in a position to dry between use. ![]() |