Inspection Information
Facility Name: Madison Shell
Facility Type: Commercial RFE < 25000 sq. ft.
[?] Inspection type: Standard
Inspection date: 17-March-2023
3717-1-05.1(O)(1) / Using a handwashing sink - accessible at all times
Critical Handwashing sink not accessible. Observed hand sink that is not accessible, covered with boxes.
Action: Hand wash sink shall be accessible and usable at all times. Will Recheck during reinspection. Correct By: 31-Mar-2023
3717-1-04.1(Y) / Temperature measuring devices.
Hot and cold holding equipment thermometer was missing, located incorrectly, or not easily readable. Observed no thermometer located in Coldsell Reach in unit.
Action: Provide a thermometer ASAP, will recheck in ten days. Correct By: 31-Mar-2023
3717-1-05.4(P) / Maintaining refuse areas and enclosures.
Improperly cleaned storage area for refuse, recyclable, or returnables. Observed debris/trash around dumpster enclosure on ground.
Action: Clean area thoroughly on frequent basis. Recheck during reinspection.
3717-1-05.4(F)(1) / Outside receptacles - tight fitting lids
Outdoor refuse containers without tight fitting lids, doors, or covers. Observed dumpster stored in the open position.
Action: Keep lids properly enclosed between use.
3717-1-06.4(F) / Drying mops.
Repeat Mops dried improperly. Observed wet mop head stored in bucket.
Action: Mop shall be stored in a position to dry between use.