3701-31-04 (B) / All facilities are maintained clean, safe and sanitary condition and in good repair.
All facilities are maintained clean, safe and sanitary condition and in good repair. The facilities were not maintained in a safe, clean & sanitary, and in good repair. At time of inspection observed small cracks on pool deck by skimmer boxes and damaged perimeter drain covers.
Ensure these areas are repaired to prevent injuries and maintain facility at all times.
3701-31-04 (B)(6)(k) / Outlet drain covers are secure/meet ANSI/ASME A112.19.8-2007 requirements.
Critical At time of inspection no VGB certification/ANSI A112 was observed. In December 2007 the United States Congress passed the Virginia Graeme Baker (VGB) Pool & Spa Safety Act, which requires that all swimming pool or spa drain covers manufactured, distributed or entered into commerce in the United States conform to the entrapment protection standards of the ASME/ANSI A112.19.8 performance standard, or any successor standard regulating such swimming pool or spa drain covers. As noted in the Pool & Spa Safety Act, the ASME/ANSI A112.19.8-2007 standard establishes minimum standards for construction, configuration and testing to ensure that a pool or spa main drain does not pose a suction entrapment hazard.
Ensure proper paperwork is kept on file and available. If certifications can't be located replace covers ASAP.
3701-31-04 (C)(3) / Total alkalinity is at or greater than 60 ppm
Repeat Total alkalinity was less than 60 ppm.
Raise the total alkalinity to at least 60 ppm.
3701-31-04 (E)(2)(a)(ii) / A USCG Type IV personal flotation device with 30 -60 foot throw line provided
A USCG Type IV personal flotation device with 30 -60 foot throw line was not provided at the unguarded pool. At time of inspection safety line was measure to be 29 ft long due to extra knotted handle. Ensure rope is between 30-60 foot at all times.
Provide a proper floatation device with required length of rope at all times.